1 / 5
Model No. : | MMW-1 |
---|---|
Brand Name : | Chenda |
Type : | Friction Testing Machine |
Jinan, Shandong, China
Descripción del Producto
Especificación técnica:
1. Test force |
|
1.1 Axial test force working range |
10~1000N |
1.2 Error of indicationg value lower than 200N |
Not bigger than±2N |
Error of indicationg value upper than 200N |
Not bigger than±1% |
1.3 Discriminability of test force |
Not bigger than 1.5N |
1.4 Relative error of long time auto hold indicating value |
Not bigger than±1%FS |
1.5 Return zero error of digital display device of test force indicating value |
Not bigger than±0.2%FS |
2. Friction Moment |
|
2.1 Measuring maximum friction moment |
2.5N.m |
2.2 Relative error of friction moment indicating value |
±2% |
2.3 Friction force weighing transducer |
50N |
2.4 Friction force arm distance |
50mm |
2.5 Discriminability of friction moment indicating value |
Not bigger than 25N.mm |
2.6 Return zero error of digital display device of friction |
Not bigger than ±0.2%FS |
3. Range of spindle stepless speed variation |
|
3.1 Stepless speed variation |
1~2000r/min |
3.2 Special deceleration system |
0.05~20r/min |
3.3 For over 100r/min, error of spindle speed |
Not bigger than ±5r/min |
For below 100r/min, error of spindle speed |
Not bigger than ±1r/min |
4. Testing Media |
Oil, water, muddy water, abrasive material |
5. Heatinig system |
|
5.1 Heater working range |
Room temperature~260℃ |
5.2 Disc type heater |
Φ65,220V,250W |
5.3 Platinum thermo resistance |
1 group each(long&short) |
5.4 Temperature measuring control accuracy |
±2℃ |
6. Conicity of spindel of testing machine |
1:7 |
7. Max. Distance between spindle and lower disc |
≥75mm |
8. Spindel control mode |
|
8.1 Manual control |
|
8.2 Time control |
|
8.3 Revolution control |
|
8.4 Friction moment control |
|
9. Time display&control range |
0s~9999min |
10. Revolution display&control range |
0~9999999 |
11. Output maximum moment of main motor |
5N.m |
12. Overall dimension(L*W*H) |
750*700*1700mm |
13. Net weight |
About 700kgs |
Parámetro técnico principal :
1. Max. Fuerza de prueba: 1000N
2. Velocidad del husillo: 10 ~ 2000r / min
3. Par de fricción máximo: 2.5Nm
4. Error relativo de la fuerza de prueba: ± 1%
5. Rango de control de temperatura de muestra: temperatura ambiente ~ 260
6. Dimensión (L * W * H): 750 * 700 * 1700mm
Diagrama de fricción de prueba:
1. Prueba de fricción de pin
La muestra para la prueba de fricción del Pin es un pasador cilíndrico debajo de la muestra para el anillo. Puede hacer el proceso de mate en una muestra de pin. Si la fuerza de prueba es pequeña, puede hacer una prueba de fricción de un solo pin, también puede hacer una prueba de tres pines al mismo tiempo. La fricción de la siguiente manera:
2. Prueba de fricción de la cara del extremo del anillo de empuje
Se puede hacer la prueba de desgaste entre dos caras de mataril. La muestra de fricción del material estudiado se puede procesar en el espécimen superior e inferior.
Jinan, Shandong, China
Envíe su consulta a este proveedor