Iniciar sesión Unirse gratis
1 / 5
Cinta de fibra de PP aplicada en frío para juntas de soldadura
| Model No. : | T500 |
|---|---|
| Brand Name : | Xunda |
Jining, Shandong, China
- Fabricante
- Servicio OEM
- Certificación de plataforma
- Video
Descripción del Producto
Cinta de fibra de PP aplicada en frío para juntas de soldadura curvas de accesorios (T500)
1. Descripción del sistema:
La serie XUNDA-T 500 es la cinta de aplicación en frío, tanto para las tuberías metálicas y trabajos de impermeabilización contra el mal tiempo al aire libre malas.
La cinta de tejido de fibra de PP se aplicará después de que el adhesivo líquido a mano o con una máquina de envolver.
|
Waterproofing- |
Pipelines protection |
|
-Waterproofing membrane for basements,substructures and flat deck applications. plazas, bridge, vehicular traffic structures, or parking decks overlaid with an asphalt concrete wearing course. -Tough, high performance waterproof membrane for critical substructures and civil engineering works. -Provides a vapor and waterproof membrane to water excluding structures and protects concrete from attack by aggressive ground salts. -Protection for wall ,floor, roof, corner, basement etc. to against from attack by bad weather, rain, acid alkaline salt |
_ Weld joints _ Bends _ Fittings _ Bare pipe lengths _ Pipe rehab and repair -Bare pipe length
|
2. Estructuras
La especificación de la cinta consta de tres capas,
Capa adhesiva: Caucho butílico Compuesto bituminoso
Respaldo: tejido de tela PP
Interleaf: Película antiadhesiva tratada con silicona
3. Características
|
Waterproofing- |
Pipes protection |
|
-Cold applied. -High resistance to bad weather environment -Good performance itself to keep dry -Easily application &installation. -Suitable for a wide range of temperatures - Compatible primers -Safe,clean |
_ Cold applied _ Excellent self adhesion to pipe _ Flexibility provides extra protection at vulnerable areas _ Excellent conformability and consistent uniform thickness _ Easily applied with no special equipment _ Compatible with common pipe coatings _ Excellent resistance to cathodicdisbonding _Wider service temperature range
|
4. Propiedades físicas
Cintas de polipropileno de malla de membrana XUNDA-T 500 Series
|
Item |
T 5100 |
T 5130 |
T 5150 |
T 5165 |
|
|
Total thickness (mil) |
40mils |
50mils |
60mils |
65mils |
|
|
Tensile Strength (lb/in) |
30(5kg/cm) |
35(6.3kg/cm) |
39(7kg/cm) |
42(7.5kg/cm) |
|
|
Elongation (%) |
400 |
400 |
450 |
500 |
|
|
Length |
25mtrs |
20mtrs |
15mtrs |
10mtrs |
|
|
Width |
2[,4",6",9" |
||||
|
Peeladhesion To primed pipe (oz/in) |
269(3kg/cm) |
296(3.3kg/cm) |
314 (3.5kg/cm) |
340(3.8kg/cm) |
|
|
To backing (oz/in) |
90(1kg/cm) |
90(1kg/cm) |
117(1.3kg/cm) |
135(1.5kg/cm) |
|
|
Dielectric Strength (KV/mm) |
42 |
42.6 |
43 |
43.8 |
|
|
Volume Resistivity (ohm·m) |
2.5 X 1012 |
2.5 X 1012 |
2.5 X 1012 |
2.5 X 1012 |
|
|
Water Vapor Transmission Rate (g/ m2/24h) |
0.06 |
0.05 |
0.03 |
0.02 |
|
|
Water Absorptivity (%) |
0.1 |
0.1 |
0.1 |
0.1 |
|
|
Application Temperature (°F) |
-31-+160 (-35-+70℃) |
||||
|
Max service temperature (°F) |
-40-+250 (-40-+121℃) |
||||
Jining, Shandong, China
- Fabricante
- Servicio OEM
- Certificación de plataforma
- Video
Envíe su consulta a este proveedor