1 / 5
Model No. : | ASTM A513 |
---|---|
Brand Name : | ENRIQUECER |
Type : | Seamless |
Ningbo, Zhejiang, China
Descripción del Producto
Descripción del producto:
Proveedor y fabricante de tubos de acero DOM de China, oferta de bajo precio, ingeniería de alta calidad de acero especial, tubos de acero sin costura DOM, tubería de acero DOM, etc.
Grado de acero / Material de acero:
Composición química (análisis de fundición) a
Steel Grade | % by mass | ||||||
Name | Number |
C max |
Si max |
Mn max |
P max |
S max |
Altot min |
E215 | 1.0212 | 0.10 | 0.05 | 0.70 | 0.025 | 0.015 | 0.025 |
E235 | 1.0308 | 0.17 | 0.35 | 1.20 | 0.025 | 0.015 | - |
E355b | 1.0580 | 0.22 | 0.55 | 1.60 | 0.025 | 0.015 | - |
a Elements not included in this table (but see footnote b) shall not be intentionally added to the steel without the agreement of the purchaser, except for elements which may be added for finishing the cast. All appropriate measures shall be taken to prevent the addition of undesirable elements from scrap or other materials used in the steel making process. b Additions of Nb, Ti and V are permitted at the discretion of the manufacturer. The content of these elements shall be reported. |
Propiedades mecánicas a temperatura ambiente.
Steel Grade | Yield strengtha | Tensile strength | Elongation | |
Name | Number |
ReH min Mpa |
Rm min Mpa |
A min % |
E215 | 1.0212 | 215 | 290 to 430 | 30 |
E235 | 1.0308 | 235 | 340 to 480 | 25 |
E355 | 1.0580 | 355 | 490 to 630 | 22 |
a For tubes with outside diameter ≤ 30 mm and wall thickness ≤ 3 mm, the ReH minimum values are 10 MPa lower than the values given in this table. NOTE: The steel grades defined in this part of EN 10305 have an intrinsic minimum transverse impact energy of 27 J at 0 °C. |
Condición de entrega:
+ N
Rango de tamaño:
OD: 4.0-220 mm
WT: 0.5-30mm
Longitud: max 7000mm
Característica del tubo de acero DOM:
Buena concentricidad
Buena tolerancia de OD e ID
Alta precisión
Calidad estable
Rugosidad suave
GARANTÍA DE CALIDAD DE TORICH
Nuestra compañía:
Control de calidad:
PREGUNTAS MÁS FRECUENTES:
R: Un inventor, fabricante y proveedor profesional de soluciones de materiales para tubos de acero.
A: generalmente es 7-14 días si los productos están en stock. o es de 30 a 60 días si los productos no están en stock, según la cantidad.
R: Sí, podríamos ofrecer la muestra de forma gratuita, pero debemos pagar el costo del flete.
A: Pago <= 1000USD, 100% por adelantado. Pago> = 1000USD, 30% T / T por adelantado, saldo antes del envío.
Si tiene otra pregunta, por favor no dude en contactarnos
Torich ASTM A513 Tubos de acero al carbono de precisión DOM Tubo de acero
Ningbo, Zhejiang, China
Envíe su consulta a este proveedor