1 / 5
Model No. : | EN10 |
---|---|
Brand Name : | Escocés |
place of origin : | China |
Shenzhen, Guangdong, China
Descripción del Producto
EN10 Epon ONT 1GE para soluciones FTTX
EN10 E Pon Ont ( 1GE ) Especificaciones
Version |
Date |
Author |
Reviewers |
Remark |
V1.0 |
2017/2/18 |
|
|
Shall not disclose to any third party |
|
|
|
|
|
|
|
|
|
|
Contenido
1.1 Posicionamiento del producto
EN10 Los dispositivos terminales están diseñados para cumplir con la demanda de servicio de juego FTTH y Triple de operadores de red fijos o operadores de cable. La caja se basa en la tecnología Epon madura, que tiene una alta relación de rendimiento al precio. Son altamente confiables y fáciles de mantener, con QoS garantizado para diferentes servicios. Y cumple totalmente con regulaciones técnicas como IEEE802.3AH y el requisito técnico de Epon Equipment (V2.1 y versión superior) de China Telecom.
EN10 es el equipo terminal de modo FTTH que diseñó para interiores aplicaciones. La aplicación específica se refiere a la imagen 1- 1
Imagen 1- 1 En10 Productos Diagrama de red
EN10 Figura del producto como imagen 2-1
Imagen 2-1 EN10 figura del producto
Tabla 2-1 Descripción Equipo EN10 Interfaz
Port Type |
Function |
PON port |
Connect PON port with internet by SC type, single mode optical fiber cable |
LAN port |
RJ45Port connects to local internet, 1 GE port automatically |
PWR port (DC12 V) |
Connect with power adapter |
Power turn on/off |
Power turn on/off |
2.2 Indicadores del dispositivo
Tabla 2- 2 EN10 Declaración LED
Indicators |
status |
Description |
POWER |
Light on |
ONU power supply normally |
Light off |
ONU no power supply |
|
PON |
Light on |
ONU link active |
Flash |
ONU manage to link |
|
Light off |
ONU receiving power rate lower than optical receiver sensitivity |
|
LOS |
Blink |
Device does not receive optical signals. |
off |
Device has receivedoptical signal. |
|
LAN |
Light on |
network port linked, but no data transmitting |
Flash |
network port data pass |
|
Light off |
ONU no power supply or internet cable unlink |
3.1 Estructura física, medio ambiente y parámetro eléctrico
Tabla 3-1 EN10 Especificación y entorno de trabajo
Parameter |
Nominal |
Dimension |
110mm x 100mm x 23mm(L×W×H) |
Net weight |
0.3kg |
Typical power consumption |
<5W |
Noise |
None |
Cooling style |
Naturally cooling |
Power supply |
12V DC(By external AC/DC adapter) |
Installation style |
Support PC, wall mount or put inside of information box. |
Environment |
0~45℃ |
Atmospheric pressure |
70~106Kpa |
MTBF |
50,000hours |
MTTR |
30minutes |
Parameter |
Nominal |
3.2 ESPECIFICACIONES DE INTERFAZ PON
Tabla 3-2 Interfaz EN10 E PON
Parameter |
Nominal |
Connector style |
SC/UPC (SC/APC optional) |
PON quantity |
1 |
Fiber style |
Single mode |
Wavelength |
TX:1310 +/-20nm RX:1490 +/-10nm |
PON interface standard |
IEEE802.3ah |
PON interface receiving rate |
1.25Gpbs |
PON interface transmitting rate |
1.25Gpbs |
Output optical power |
Min: 0dBm Max: +5dBm |
Opticalreceiver sensitivity |
Precede -27dBm |
The length of the optical link |
Max 20km |
Apoyar múltiples VLAN
Apoya el control de la tormenta de la red.
Shenzhen, Guangdong, China
Envíe su consulta a este proveedor